Description
|
Zombie Components LLC
|
www.zombiecomponents.com |
Optixia XM2 portable 2-slot chassis with Windows 7 with IxOS 6.90.1150.14 GA, with the permanent IxOS and IxNetwork licences listed below.
Seller refurbished: repaired and refurbished; 90 day warranty. Operating system upgraded to run on an SSD, which dramatically improves performance.
| Parameter | Value |
|---|---|
| MPN | Optixia XM2 |
| Controller operating system | Windows 7 |
| IxOS installed | 6.90.1150.14 GA |
| Licences | Permanent: IxServer framework (922-0001), IxNetwork framework (895-0100) and 20 IxNetwork options, listed below |
| Load module slots | 2, XM form factor, hot-swappable |
| Storage | SSD (operating system upgraded to run on SSD) |
| Power input | 100-240 V, 50-60 Hz, 12 A (rear label) |
| Front panel | Slot Power / Active LEDs, Pwr and HDD LEDs, System Status LCD, USB, DVD/CD |
| Rear panel | PS/2, USB, VGA, RJ-45 LAN, DB9 Com, Sync In and Sync Out, GPS |
| Size | 4.8 in H x 20.0 in W x 14.2 in D (12.2 x 50.8 x 36.1 cm) |
| Weight, empty | 25 lb (11.34 kg) |
| Operating temperature | 41 to 104 F (5 to 40 C) |
| Orientation | Operate in the horizontal position only |
930-2022 IxNetwork, Optional Sftw, RFC 2544, Custom Integrated Tests
930-2002 IxNetwork SWBundle
930-2009 IxNetwork, Optional Software, OSPFv3 Emulation
930-2007 IxNetwork Opt SW BGP4 Emulation IPv6
930-2013 IxNetwork, Optional Software, RIPng IPv6 Emulation
930-2011 IxNetwork, Optional Software, IS-IS Emulation with additional IPv6 support
930-2024 IxNetwork, Optional Software, PPPoX and L2TPv2 emulation
930-2004 IxNetwork, Optional Software, Multicast Emulation
930-2001 IxNetwork IPv4 Routing Protocols SW Bundle
930-2005 IxNetwork, Optional Software, BGP4 Emulation
930-2008 IxNetwork, Optional Software, OSPFv2 Emulation
930-2012 IxNetwork, Optional Software, RIPv2 Emulation
930-2010 IxNetwork, Optional Software, IS-IS Emulation
930-2003 IxNetwork SWBundle
930-2006 IxNetwork Opt SW BGP4 Emulation MPLS/VPN
930-2014 IxNetwork, Optional Software, MPLS RSVP-TE Emulation
930-2015 IxNetwork, Optional Software, MPLS LDP Emulation includes Layer 2 MPLS VPN and VPLS support
930-2027 IxNetwork, Optional Software, Control Plane Tests for PPPoX/L2TPv2, 802.1x, and NAC
922-0001 FRAMEWORK (IxServer), IXOS SOFTWARE, NODE-LOCKED, SINGLE USER LICENSE
895-0100 IXNETWORK, FRAMEWORK
Rack mount ear brackets are available for $50.
The chassis carries the server software only; IxServer and IxExplorer are the desktop applications on the chassis. The licensed features are used through Ixia client applications (IxNetwork, HLTAPI and others) running on a separate PC, or on an application server in a multi-user setup. One client session can use the licensed features of several chassis at once.
Client applications are downloaded from Ixia with a customer login and are typically free. We can supply a selection of client installers at no charge on request, but that selection is incomplete and is not part of this listing. This listing guarantees the server software and licences itemised above.
Optixia XM2 chassis running Windows 7 with IxOS 6.90.1150.14 GA and the permanent licences listed above, per unit purchased.
Not included:
Load modules
Rack mount ear brackets (available for $50)
Monitor, keyboard and mouse
Ixia client applications
Any accessory not shown in the photos and not listed as included
Ixia load modules are tested in our own lab, in an Ixia chassis, with a version-matched IxOS. Every port runs traffic at full line rate with 64-byte frames, the highest frame rate and the hardest case, on all ports at once. Error counters are zeroed at the start, monitoring is read-only, and the traffic runs undisturbed for a window long enough to prove the bit-error limit below statistically, not for a fixed time.
Ixia and Keysight publish no acceptance criteria for load modules, so we apply our own written standard, ZC-AC rev 2. Each criterion is benchmarked to IEEE 802.3 or RFC 1242/2544 and set tighter, so that a module we pass adds no measurable error, loss or rate deviation to the data its user collects. Where the industry sets no number, nothing is tolerated.
| Check | Industry reference | Our acceptance limit |
|---|---|---|
| Boot | IxServer power-on record (no industry limit) | Zero FAIL records; the card reaches Board Ready |
| Link | IEEE 802.3 link status | Up on every port in every sample; zero link drops for the whole window |
| Line rate | IEEE 802.3 PHY rate | Nominal speed in every sample; no downshift or renegotiation |
| Throughput | IEEE 802.3 ±100 ppm clock tolerance; RFC 2544 §26.1 | Within ±100 ppm of the theoretical frame rate at 64-byte frames, all ports at once |
| Frame loss | RFC 1242 §3.17 / RFC 2544: throughput = highest rate with zero loss | Zero loss at full line rate on every port simultaneously |
| Bit errors | IEEE 802.3 BER objective: 10-12 (1000BASE-X, 10G to 100G), 10-10 (1000BASE-T) | Zero errors over enough bits to prove a BER at least 5× better than the objective at 95% confidence (beyond the 4:1 test-uncertainty ratio of ANSI/NCSL Z540.3) |
| Temperature | Commercial silicon rated to 85 °C | Every sensor below 75 °C for the whole window; drift within ±5 °C |
| Stability | IxServer event log (no industry limit) | Zero card hardware events during the window |
Our test reports state, for every section, the criterion, the value measured and the result, and print every error counter per port for the whole window. Where the Ixia software does not expose a reading (fan speed, supply voltage, optical DDM), the report says so; nothing is inferred. A unit that fails is diagnosed, not written off. Testing to this standard, with a signed written report, is available as a service.
Items outside this test capability are visually inspected and reviewed for operational status. Any exceptional wear is noted in the description.
We are here to help after the sale.
Troubleshooting and failure analysis. When a chassis or load module misbehaves (a card that will not enumerate, drops link, resets, or fails at start-up), we diagnose it from the evidence, down to the board:
| Step | What we do |
|---|---|
| 1. Evidence first | We pull the IxServer logs from the chassis, including the boot record of the failing card. Every finding in our report traces to a log line or a numbered bench run. |
| 2. Boot analysis | The failing card’s start-up is compared step by step against a healthy initialization recorded on the same chassis model and IxOS with a known-good card of the same model: insertion, EEPROM identity, slot power, FPGA loads, port card enumeration, fabric training. The first step that goes missing localizes the fault. |
| 3. Varied conditions | Cold boot against hot insert, repeated runs, and a check that the card reports the same identity every time; an identity that changes between runs is itself evidence of a damaged management path. |
| 4. Hardware-level verification | We swap cards. With several hundred load modules and dozens of chassis in stock, a suspect slot, carrier board, port daughter card or chassis is confirmed by substituting a known-good part and re-running, one change per numbered run, and by retesting on an isolated chassis. |
| 5. Root cause and report | Board-level attribution on multi-board assemblies, ranked root-cause hypotheses, and a written engineering failure report with an evidence index, the disposition and the next steps. |
Repairs. We repair Ixia chassis and load modules in our lab, verify the repair against the same acceptance standard used for testing, and document the evidence, the cause, and what was done.
Resource library. We maintain a 600 GB Ixia resource library: platform reference guides and user manuals across IxOS releases, product compatibility matrices, and IxOS, IxNetwork and IxLoad software builds across versions. It lets us answer compatibility, configuration and version questions from the manufacturer’s own documentation.
Test plans. We can build test plans to satisfy your engineering needs. We take what you test today (a manual procedure, a legacy Spirent or Xena configuration, or nothing yet), map it onto IxNetwork and IxLoad, work out the licences, modules and ports it needs, and quote each step before any work starts.
Contact us through eBay messages to discuss any of these.
Orders may take up to 3 business days to ship from payment; weekends are not counted. Palletized items may take up to 5 business days. If you need faster service, contact us before ordering so we can adjust priorities. We reserve the right to change the selected shipping method to an equivalent or better service that fits the item.
We ship worldwide. USPS may not be an acceptable choice for international shipping due to size, weight, and export documentation restrictions; you may be asked to select FedEx, UPS, or DHL at a higher price. Confirm your shipping choice with us before ordering if in doubt.
Export compliance. Our products are subject to the U.S. Export Administration Regulations (EAR), overseen by the Bureau of Industry and Security (BIS) and the U.S. Census Bureau. We do not ship to Country Group E. Determining the Export Control Classification Number (ECCN) can take up to 30 days; where an export license is required, licensing can take a further 30-90 days. For international orders we require a written statement of the ultimate end user, the intended end use of each product, and the buyer’s agreement to comply with the EAR. You will receive an email with the documentation; the order cannot be processed until it is complete.
This listing carries a 60 day money back guarantee: return your purchase for any reason within 60 days for a full refund or exchange. Returned items must be in the condition received and in the original packaging.
This unit also carries a 90 day warranty: within 90 days, a warranty claim is returned at our expense for a refund, repair, or replacement. Longer warranty terms can be arranged at the time of purchase.
All items are guaranteed to be as described. Any item not as described can be returned at our expense for a full refund, regardless of any as-is marking.
If you are dissatisfied for any reason, contact us first and give us a chance to work things out; if we cannot fix it, you receive 100% of your purchase price back.
We do not keep or share your information anywhere. Your information resides only on eBay and is available to us only for a limited time while we interact with you on an inquiry, order, or return, per eBay usage policies.
Additional information
| Weight | 35.00 lbs |
|---|---|
| Dimensions | 24 × 20 × 10 in |
| Brand | |
| MPN | |
| Condition | |
| Condition Description | |
| Country of Origin | United States |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
LAN/WAN & Protocol Analyzers
Ixia Optixia XM-12 with IxOS 6.90 & 6.70 + IxLoad + IxNetwork + Analyzer
LAN/WAN & Protocol Analyzers
Ixia K2 HSE100GETSP1-01 100Gb/s Wire Speed Ethernet / IP Test Module
LAN/WAN & Protocol Analyzers
Ixia Xcellon-Ultra NP High Performance Twelve 1 GbE One 10GbE Load Module
Reviews
There are no reviews yet.