Description
|
Zombie Components LLC
|
www.zombiecomponents.com |
Ixia XG12 12-slot modular chassis with a Windows XP chassis controller, IxOS 6.70.1050.14 EA Patch 2 installed, and 25 permanent, node-locked IxOS, IxNetwork, IxLoad and IxVPN licensed features, itemised below.
The load module in the machine as pictured is not included.
Seller refurbished: repaired, refurbished; 90 day warranty; does not include the load module in the machine as pictured.
| Parameter | Value |
|---|---|
| MPN | XG12 |
| Chassis | Ixia XG12, 12-slot modular chassis |
| Controller operating system | Windows XP |
| IxOS installed | 6.70.1050.14 EA Patch 2 |
| Licences | Permanent, node-locked to this chassis (25 licensed features, listed below) |
| Chassis modules | 941-0017 frame, 942-0031 fan module, 942-0032 power supply module, 942-0033 processor module; each field replaceable |
| Load module slots | 12, XM form factor; load modules hot-swappable (processor module is not) |
| Management ports | Two RJ-45 10/100/1000 Mbps Ethernet |
| Front panel I/O | HD-DB15 Super VGA, 4 USB, Sync In and Sync Out (RJ11), on/off push button |
| Front panel indicators | Power and In Use LEDs above each slot; 2×16 LCD with chassis name, IxOS version, IP address, master/subordinate and status |
| Power supply module | Three 2825 W supplies, each removable separately |
| Power input | Three single-phase 200-240 VAC, 50/60 Hz circuits, 3680 W each with a 20 A breaker; IEC 60320-C19 inlets; all three cords must be connected |
| Size | 19.0 in W x 19.21 in H x 27.2 in D (48.26 x 48.79 x 69.09 cm), 11RU |
| Weight | 104.9 lb (47.6 kg) complete, without load modules |
| Airflow clearance | 12 in at the rear required, 24 in preferred; filler panels required in open slots |
| Operating temperature | 41 to 104 F (5 to 40 C); lowered to match any installed load module with a lower rating |
| Noise | Up to 87 dB(A) at maximum fan speed; ear protection required |
| # | Category | Part No | Description | License |
|---|---|---|---|---|
| 1 | IxLoad | 895-0301 | FRAMEWORK, IxLoad | Permanent |
| 2 | IxLoad | 925-3003 | IXLOAD, HTTP-Basic, FTP, QuickTCP, QuickHTTP | Permanent |
| 3 | IxLoad | 925-3100 | IXLOAD-ADVNET, Advanced Networking Features, SW Opt | Permanent |
| 4 | IxLoad | 925-3102 | IXLOAD-DDOS, DDoS & Vulnerability attacks, SW Optio | Permanent |
| 5 | IxLoad | 925-3103 | IXLOAD-MAIL, Email Protocols, SW Option | Permanent |
| 6 | IxLoad | 925-3104 | IXLOAD-STREAM, Streaming Protocols, SW Option | Permanent |
| 7 | IxLoad | 925-3105 | IXLOAD-VIDEO, Video over IP, SW Option | Permanent |
| 8 | IxLoad | 925-3106 | IXLOAD-VOICE, VOIP caller and callee emulation, SW | Permanent |
| 9 | IxLoad | 925-3153 | IXLOAD-Stateless-Peer, OPT SW, a | Permanent |
| 10 | IxLoad | 925-3200 | IXLOAD-U1, SW Upgrade, From IXLOAD to IXLOAD-PLUS | Permanent |
| 11 | IxLoad | 925-3202 | IXLOAD, HTTP-Advanced, Impairment | Permanent |
| 12 | IxNetwork | 895-0100 | IXNETWORK, FRAMEWORK | Permanent |
| 13 | IxNetwork | 930-2004 | IxNetwork, Optional Software, Multicast Emulation | Permanent |
| 14 | IxNetwork | 930-2005 | IxNetwork, Optional Software, BGP4 Emulation | Permanent |
| 15 | IxNetwork | 930-2007 | IxRouter/IxNetwork, BGP4 w/IPv6 support | Permanent |
| 16 | IxNetwork | 930-2008 | IxNetwork, Optional Software, OSPFv2 Emulation | Permanent |
| 17 | IxNetwork | 930-2009 | IxNetwork, Optional Software, OSPFv3 Emulation | Permanent |
| 18 | IxNetwork | 930-2010 | xNetwork, Optional Software, IS-IS Emulation | Permanent |
| 19 | IxNetwork | 930-2011 | IxNetwork, Optional Software, IS-IS Emulation with | Permanent |
| 20 | IxNetwork | 930-2012 | IxNetwork, Optional Software, RIPv2 Emulation | Permanent |
| 21 | IxNetwork | 930-2013 | IxNetwork, Optional Software, RIPng IPv6 Emulation | Permanent |
| 22 | IxNetwork | 930-2020 | IxNetwork, Optional Software, EIGRP Emulation | Permanent |
| 23 | IxNetwork | 930-2403 | IxNetwork, IP Multicast RFC 3918 QuickTests | Permanent |
| 24 | IxOS | 922-0001 | FRAMEWORK (IxServer), IXOS SOFTWARE, NODE-LOCKED, S | Permanent |
| 25 | IxVPN | IXVPN | IxVPN, IPSec Test Application | Permanent |
| Part Number | Description |
|---|---|
| 941-0017 | XG12, 12-Slot Chassis Frame Module |
| 942-0031 | XG12, 12-Slot Chassis Fan Module |
| 942-0032 | XG12, 12-Slot Chassis Power Supply Module |
| 942-0033 | XG12, 12-Slot Chassis Processor Module |
| Family | Module | Function |
|---|---|---|
| XM Form Factor (XMFF) load modules | Xcellon-Flex™ High density 10GbE products | Xcellon-FlexAP10G16S 10 Gigabit Ethernet LAN Load Module, L2-7 Accelerated Performance, a 1-slot module with 16-ports of SFP+ interfacesXcellon-FlexFE10G16S 10 Gigabit Ethernet LAN Load Module, L2-3 Full Emulation Performance, a 1-slot module with 16-ports of SFP+ interfaces |
| Xdensity™ Ultra-high density 10GbE | Xdensity, XDM10G32S, Ultra-high density, 10-Gigabit Ethernet load module with 32-ports of SFP+ interfaces and L2-3 data plane support | |
| Xcellon-Flex™ High density 10GbE and 40 GE products | Xcellon-FlexAP10/4016SQ 10/40 Gigabit Ethernet Accelerated Performance Load Module, 16-Ports of SFP+ interfaces and 4-ports of QSFP 40 GE interfaces with full performance L1-7 supportXcellon-FlexFE40G4Q 40 Gigabit Ethernet Full Emulation Load Module, 4-ports of QSFP 40 GE with L1-3 support | |
| K2 Higher Speed Ethernet product line | HSE40GETSP1-01, 40-Gigabit Ethernet Load Module, 1-port, 2-slots, with the CFP MSA interfaceHSE100GETSP1-01, 100- Gigabit Ethernet Load Module, 1-port, 2-slots, with the CFP MSA interfaceHSE40/100GETSP1-01 Dual-Speed, 1-port, 2-slots, with CFP MSA interfaceHSE40/100GETSPR1-01, Dual Speed, 40 and 100-Gigabit Data Plane Ethernet Load Module, 1-port, 2-slots, with the CFP MSA interfaceHSE40GEQSFP1-01, 40-Gigabit Ethernet Load Module, 1-port, 1-slot with the QSFP+ pluggable interface for multimode fiber, 850nm, or QSFP+ copper cables | |
| Xcellon Ultra™ High Performance Application Test product line | Xcellon-Ultra NP-01, Application Network Processor Load Module, 1-10G XFP port and/or 12-Ports of Dual-PHY (SFP fiber and RJ45 copper) 10/100/1000 Mbps | |
| NGY High Density 10 Gigabit Ethernet product line | LSM10GXMR2/4/8-port, reduced performance, load modules with the XFP interfaceLSM10GXM2/4/8XP-port, Extra performance, load modules with the XFP interfaceLSM10GXM2S/4S/8S-port, Extra performance, load modules with the SFP+ interfaceLSM10GXM2S/4S/8S-port, reduced performance, load modules with the SFP+ interfaceLSM10GXM2GBT/4GBT/8GBT-port, Extra performance, load modules with the 10GBASE-T interfaceLSM10GXM2GBT/4GBT/8GBT-port, reduced performance, load modules with the 10GBASE-T interface | |
| Fibre Channel load module products | FCMGXM4S-01, 4-Port Fibre Channel Load Module, with 2Gbps, 4Gbps, and 8Gbps support, SFP+ interfaceFCMGXM8S-01, 8-Port Fibre Channel Load Module, with 2Gbps, 4Gbps, and 8Gbps support, SFP+ interface | |
| ImpairNet Load module products | ImpairNet EIM1G4S Gigabit Ethernet LAN Impairment module, 1-slot with 4-ports of SFP interfacesImpairNet EIM10G4S 10 Gigabit Ethernet LAN Impairment module, 1-slot with 4-ports of SFP+ interfaces | |
| Voice Quality module | VQM0001, Resource module, for real time quality of voice measurement. Must purchased with VQM0001-B1, Solution Bundle, Resource module with IXLOAD-PESQ and IXLOAD-AUDIO-CODECS software license | |
| NGY NP High Density 10GbE Application Test product line | NGY-NP8-01, 10 Gigabit Application Network Processor Load Module, 8-Port LAN/WAN, SFP+ interfaceNGY-NP4-01, 10 Gigabit Application Network Processor Load Module, 4-Port LAN/WAN, SFP+ interfaceNGY-NP2-01, 10 Gigabit Application Network Processor Load Module, 2-Port LAN/WAN, SFP+ interface | |
| High Density Gigabit Ethernet product line | LSM1000XMVDC 4/8/12/16-port, full performance, load modules with dual-phy SFP fiber and 10/100/1000Mbps RJ45 copperLSM1000XMVR4/8/12/16-port, reduced performance, load modules with dual-phy SFP fiber and 10/100/1000Mbps RJ45 copperLSM1000XMSP12-01, Gigabit Ethernet, Load Module, 12-Ports Dual-PHY (SFP fiber and RJ45 copper) 10/100/1000 Mbps | |
| Standard Form Factor (SFF) load modules for XG12 chassisRequires 944-0007 Adapter Card for XM Chassis installations | Gigabit Ethernet TX, TXS, STX and STXS products | LM100TX8, 100MB Ethernet Load Module, 8-Port 10/100Mbps, L2-3 data plane support onlyLM100TXS8, 10/100Mbps Ethernet Load Module, 8-Port RJ45, 64MB Port CPU memoryLM100TXS2, 10/100Mbps Ethernet Load Module, 2-Port RJ45, 64MB Port CPU memoryLM1000STX4, Gigabit Ethernet Load Module, 4-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps, L2-3 data plane support onlyLM1000STX2, Gigabit Ethernet Load Module, 2-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps, L2-3 data plane support onlyLM1000STXS2, Gigabit Ethernet Load Module, 2-Port Dual-PHY (RJ45 and SFP) 10/100/1000 MbpsLM1000STXS4-256, Gigabit Ethernet Load Module, 4-Port Dual-PHY (RJ45 and SFP) 10/100/1000 Mbps |
| 10 Gigabit Ethernet LSM products | LSM10G1-01, 10 Gigabit Ethernet Load Module, 1-Port, Full L2-7 support, requires interface adapter moduleInterchangeable interface adapter modules for SFP+, 10GBASE-T, XENPAK, X2, and CX4 interfaces for the LSM10G1-01 | |
| Application and Encryption Test product line | AFM (Auxiliary Function Module): AFM1000SP-0ALM (Application Load Module): ALM1000T8ELM (Encryption Load Module): ELM1000ST2Gigabit Ethernet Content Processing Module (CPM), 8-port RJ-45 10/100/1000 Ethernet | |
| 10-Gigabit UNIPHY and MacSec products | MSM10G1- 10 Gigabit Ethernet OC192 Load Module, 1-port Multi Services Module with an XFP interface, supports 10GE LAN/WAN and optional OC-192c POSLSM10GMS1-01, 10 Gigabit Ethernet Load Module, 1-Port, LAN/WAN, Full performance and supports 802.1ae Media Access Control Security (MacSec) L2 security, including GCM/AES128 | |
| Packet over SONET and ATM products | MSM2.5G1-01, OC48 Load Module, 1-Port 2.5G Multi Service Module supporting OC48c, Supports POS, Full L2-7 supportLM622MR, OC3/OC12 ATM/POS, Load Module, 2-port ATM/Packet over SONET (POS); Full L2-7 Support. Supports 622 and 155 Mbps data ratesLM622MR-512, OC3/OC12 ATM/POS, Load Module, 2-port ATM/Packet over SONET (POS), Full L2-7 Support. Supports 622 and 155 Mbps data rates, 512MB Port CPU memoryOC3OC12PHY, OC3/OC12 ATM/POS Adapter, Dual-SC optical connector, Single-port OC-3/OC-12 PHY 1310nm Multimode; For the LM622MR or LM622MR-512) load modules | |
| Power over Ethernet (IEEE802.3af) | PLM1000T4-PD (20W), Gigabit Ethernet Load Module, 4-Port PoE, supports 10/100/1000 Mbps Ethernet, and emulates up to 4 powered devicesLSM1000POE4-02 (30W), Gigabit Ethernet Load Module, 4-Port PoE, supports 10/100/1000 Mbps Ethernet, and emulates up to 4 powered devices |
The chassis carries the server software only; IxServer and IxExplorer are the desktop applications on the chassis. The licensed features are used through Ixia client applications (IxNetwork, HLTAPI and others) running on a separate PC, or on an application server in a multi-user setup. One client session can use the licensed features of several chassis at once.
Client applications are downloaded from Ixia with a customer login and are typically free. We can supply a selection of client installers at no charge on request, but that selection is incomplete and is not part of this listing. This listing guarantees the server software and licences itemised above.
One Ixia XG12 chassis (frame, fan, power supply and processor modules) with Windows XP controller, IxOS 6.70.1050.14 EA Patch 2 installed, and the permanent licences listed above.
Not included:
Load module installed in the chassis as pictured
Monitor, keyboard and mouse shown in the photos
Ixia client applications
Any accessory not shown in the photos and not listed as included
Ixia load modules are tested in our own lab, in an Ixia chassis, with a version-matched IxOS. Every port runs traffic at full line rate with 64-byte frames, the highest frame rate and the hardest case, on all ports at once. Error counters are zeroed at the start, monitoring is read-only, and the traffic runs undisturbed for a window long enough to prove the bit-error limit below statistically, not for a fixed time.
Ixia and Keysight publish no acceptance criteria for load modules, so we apply our own written standard, ZC-AC rev 2. Each criterion is benchmarked to IEEE 802.3 or RFC 1242/2544 and set tighter, so that a module we pass adds no measurable error, loss or rate deviation to the data its user collects. Where the industry sets no number, nothing is tolerated.
| Check | Industry reference | Our acceptance limit |
|---|---|---|
| Boot | IxServer power-on record (no industry limit) | Zero FAIL records; the card reaches Board Ready |
| Link | IEEE 802.3 link status | Up on every port in every sample; zero link drops for the whole window |
| Line rate | IEEE 802.3 PHY rate | Nominal speed in every sample; no downshift or renegotiation |
| Throughput | IEEE 802.3 ±100 ppm clock tolerance; RFC 2544 §26.1 | Within ±100 ppm of the theoretical frame rate at 64-byte frames, all ports at once |
| Frame loss | RFC 1242 §3.17 / RFC 2544: throughput = highest rate with zero loss | Zero loss at full line rate on every port simultaneously |
| Bit errors | IEEE 802.3 BER objective: 10-12 (1000BASE-X, 10G to 100G), 10-10 (1000BASE-T) | Zero errors over enough bits to prove a BER at least 5× better than the objective at 95% confidence (beyond the 4:1 test-uncertainty ratio of ANSI/NCSL Z540.3) |
| Temperature | Commercial silicon rated to 85 °C | Every sensor below 75 °C for the whole window; drift within ±5 °C |
| Stability | IxServer event log (no industry limit) | Zero card hardware events during the window |
Our test reports state, for every section, the criterion, the value measured and the result, and print every error counter per port for the whole window. Where the Ixia software does not expose a reading (fan speed, supply voltage, optical DDM), the report says so; nothing is inferred. A unit that fails is diagnosed, not written off. Testing to this standard, with a signed written report, is available as a service.
Items outside this test capability are visually inspected and reviewed for operational status. Any exceptional wear is noted in the description.
We are here to help after the sale.
Troubleshooting and failure analysis. When a chassis or load module misbehaves (a card that will not enumerate, drops link, resets, or fails at start-up), we diagnose it from the evidence, down to the board:
| Step | What we do |
|---|---|
| 1. Evidence first | We pull the IxServer logs from the chassis, including the boot record of the failing card. Every finding in our report traces to a log line or a numbered bench run. |
| 2. Boot analysis | The failing card’s start-up is compared step by step against a healthy initialization recorded on the same chassis model and IxOS with a known-good card of the same model: insertion, EEPROM identity, slot power, FPGA loads, port card enumeration, fabric training. The first step that goes missing localizes the fault. |
| 3. Varied conditions | Cold boot against hot insert, repeated runs, and a check that the card reports the same identity every time; an identity that changes between runs is itself evidence of a damaged management path. |
| 4. Hardware-level verification | We swap cards. With several hundred load modules and dozens of chassis in stock, a suspect slot, carrier board, port daughter card or chassis is confirmed by substituting a known-good part and re-running, one change per numbered run, and by retesting on an isolated chassis. |
| 5. Root cause and report | Board-level attribution on multi-board assemblies, ranked root-cause hypotheses, and a written engineering failure report with an evidence index, the disposition and the next steps. |
Repairs. We repair Ixia chassis and load modules in our lab, verify the repair against the same acceptance standard used for testing, and document the evidence, the cause, and what was done.
Resource library. We maintain a 600 GB Ixia resource library: platform reference guides and user manuals across IxOS releases, product compatibility matrices, and IxOS, IxNetwork and IxLoad software builds across versions. It lets us answer compatibility, configuration and version questions from the manufacturer’s own documentation.
Test plans. We can build test plans to satisfy your engineering needs. We take what you test today (a manual procedure, a legacy Spirent or Xena configuration, or nothing yet), map it onto IxNetwork and IxLoad, work out the licences, modules and ports it needs, and quote each step before any work starts.
Contact us through eBay messages to discuss any of these.
Orders may take up to 3 business days to ship from payment; weekends are not counted. Palletized items may take up to 5 business days. If you need faster service, contact us before ordering so we can adjust priorities. We reserve the right to change the selected shipping method to an equivalent or better service that fits the item.
We ship worldwide. USPS may not be an acceptable choice for international shipping due to size, weight, and export documentation restrictions; you may be asked to select FedEx, UPS, or DHL at a higher price. Confirm your shipping choice with us before ordering if in doubt.
Export compliance. Our products are subject to the U.S. Export Administration Regulations (EAR), overseen by the Bureau of Industry and Security (BIS) and the U.S. Census Bureau. We do not ship to Country Group E. Determining the Export Control Classification Number (ECCN) can take up to 30 days; where an export license is required, licensing can take a further 30-90 days. For international orders we require a written statement of the ultimate end user, the intended end use of each product, and the buyer’s agreement to comply with the EAR. You will receive an email with the documentation; the order cannot be processed until it is complete.
This listing carries a 60 day money back guarantee: return your purchase for any reason within 60 days for a full refund or exchange. Returned items must be in the condition received and in the original packaging.
This unit also carries a 90 day warranty: within 90 days, a warranty claim is returned at our expense for a refund, repair, or replacement. Longer warranty terms can be arranged at the time of purchase.
All items are guaranteed to be as described. Any item not as described can be returned at our expense for a full refund, regardless of any as-is marking.
If you are dissatisfied for any reason, contact us first and give us a chance to work things out; if we cannot fix it, you receive 100% of your purchase price back.
We do not keep or share your information anywhere. Your information resides only on eBay and is available to us only for a limited time while we interact with you on an inquiry, order, or return, per eBay usage policies.
Additional information
| Weight | 125.00 lbs |
|---|---|
| Dimensions | 25 × 25 × 22 in |
| Brand | |
| MPN | |
| Condition | |
| Condition Description | REPAIRED, REFURBISHED… 90 DAY WARRANTY *** DOES NOT INCLUDE LOAD MODULE IN MACHINE AS PICTURED*** |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.