Ixia WaveBlade WBW1000 WiFi 802.11a/b/g Multi-Protocol Network Analyzer

Ixia WaveBlade WBW1000, a WiFi 802.11 a/b/g multi-protocol network analyzer blade. The faceplate is marked VeriWave, WaveBlade, WiFi 802.11 a/b/g, WBW1000.

Front panel: one RF connector, a Reset button and status LEDs for Power, Ready/Fault, Reserved, TRIG, WLAN A, WLAN B/G, TX, RX and Collide. The board carries an RF module under a shield and three SO-DIMM memory modules.

The inventory label in listing photo 2 reads: IXIA Wavetest 90 WIFI 10-Slot Performance Traffic Analyzer + Wavetest 22, WBW1000. This listing is for the WBW1000 blade shown.

One WBW1000 WaveBlade per unit purchased, as shown in the photos.

Not included:
Chassis
Antennas and RF cables

Ixia load modules are tested in our own lab, in an Ixia chassis, with a version-matched IxOS. Every port runs traffic at full line rate with 64-byte frames, the highest frame rate and the hardest case, on all ports at once. Error counters are zeroed at the start, monitoring is read-only, and the traffic runs undisturbed for a window long enough to prove the bit-error limit below statistically, not for a fixed time.

Ixia and Keysight publish no acceptance criteria for load modules, so we apply our own written standard, ZC-AC rev 2. Each criterion is benchmarked to IEEE 802.3 or RFC 1242/2544 and set tighter, so that a module we pass adds no measurable error, loss or rate deviation to the data its user collects. Where the industry sets no number, nothing is tolerated.

Our test reports state, for every section, the criterion, the value measured and the result, and print every error counter per port for the whole window. Where the Ixia software does not expose a reading (fan speed, supply voltage, optical DDM), the report says so; nothing is inferred. A unit that fails is diagnosed, not written off. Testing to this standard, with a signed written report, is available as a service.

Items outside this test capability are visually inspected and reviewed for operational status. Any exceptional wear is noted in the description.

Orders may take up to 3 business days to ship from payment; weekends are not counted. If you need faster service, contact us before ordering so we can adjust priorities. We reserve the right to change the selected shipping method to an equivalent or better service that fits the item.

We ship worldwide. USPS may not be an acceptable choice for international shipping due to size, weight, and export documentation restrictions; you may be asked to select FedEx, UPS, or DHL at a higher price. Confirm your shipping choice with us before ordering if in doubt.

Export compliance. Our products are subject to the U.S. Export Administration Regulations (EAR), overseen by the Bureau of Industry and Security (BIS) and the U.S. Census Bureau. We do not ship to Country Group E. Determining the Export Control Classification Number (ECCN) can take up to 30 days; where an export license is required, licensing can take a further 30-90 days. For international orders we require a written statement of the ultimate end user, the intended end use of each product, and the buyer’s agreement to comply with the EAR. You will receive an email with the documentation; the order cannot be processed until it is complete.

We do not keep or share your information anywhere. Your information resides only on eBay and is available to us only for a limited time while we interact with you on an inquiry, order, or return, per eBay usage policies.