Description
| Zombie Components LLC | www.zombiecomponents.com |
Eppendorf Centrifuge 5424 non-refrigerated benchtop microcentrifuge, rotary knob control
version. The unit is supplied with the
FA-45-24-11 fixed angle rotor installed, including the aerosol-tight rotor lid and its red
fastening nut. The rotor lid is marked FA-45-24-11 : 5424/5424R, aerosol-tight, CE 08/12,
60 Day Money Back Guarantee.
- FA-45-24-11 rotor present and installed. This is the single biggest value item on a used.
- 5424; bare chassis without a rotor sell for a fraction of a complete unit.
- Aerosol-tight rotor lid present with its red fastening nut. Frequently missing on used units.
- And required for spin column and biosafety work.
- Unit takes power and the control board runs (LCD lit, set values shown, open key backlit).
- Housing, keypad overlay, lid, hinge and latch are all complete and undamaged.
- Three units available, so a buyer can take a matched set.
| Parameter | Value |
| MPN | 5424 |
| Manufacturer | Eppendorf |
| Model | Centrifuge 5424, non-refrigerated, rotary knob control |
| Maximum speed | 15,000 rpm |
| Maximum relative centrifugal force | 21,130 x g |
| Speed range | 100 rpm to 15,000 rpm |
| Rotor | FA-45-24-11, 45 degree fixed angle, 24 places, aerosol-tight, 1.5 mL and 2.0 mL tubes |
| Controls | rotary knobs for time and speed, menu/enter, rpm/rcf toggle, short spin, start/stop, motorized lid release |
| Housing dimensions per manufacturer | 236 x 320 x 227 mm, 9.3 x 12.6 x 8.9 in |
| Weight per manufacturer, without rotor | 13.4 kg, 29.5 lb |
| Power consumption per manufacturer | 250 W |
| Mains connection | IEC C14 appliance inlet, rear fuse holder marked T 6,3 A 5 x 20 on the unit |
Eppendorf Centrifuge 5424 chassis
FA-45-24-11 fixed angle rotor, installed
Aerosol-tight rotor lid with red fastening nut, installed
Not included:
Power cord
Rotor key
Tube adapters, tubes, spin column accessories
Manual, original packaging, calibration or service records
adapters for 0.2 mL, 0.4 mL and 0.5 mL tubes; none are included here. A detachable IEC C13
mains cord is required. Confirm that the supply voltage on the rating plate at the rear of the
unit matches your lab supply before connecting. Allow the manufacturer specified clearance
around the instrument for ventilation and for the safety margin during operation.
Where possible, electronics are tested. The value of an item determines the effort put into testing; items not specifically tested in detail are visually inspected and reviewed for operational status. Any exceptional wear is noted in the description. Most items are covered by a money-back guarantee.
Ships double boxed. Outer carton 18 x 18 x 28 in, approximately 41 lb gross with packing
material. The rotor stays installed and secured with its fastening nut for transit.
Orders may take up to 3 business days to ship from payment; weekends are not counted. If you need faster service, contact us before ordering so we can adjust priorities. We reserve the right to change the selected shipping method to an equivalent or better service that fits the item.
We ship worldwide. USPS may not be an acceptable choice for international shipping due to size, weight, and export documentation restrictions; you may be asked to select FedEx, UPS, or DHL at a higher price. Confirm your shipping choice with us before ordering if in doubt.
International shipments may be delayed or cancelled due to EAR and ITAR export compliance requirements. The vast majority of our items need no export license and ship under EAR99 and other exemptions; items that require a license are indicated in the listing.
This listing carries a 60 day money back guarantee: return your purchase for any reason within 60 days for a full refund or exchange. Returned items must be in the condition received and in the original packaging.
All items are guaranteed to be as described. Any item not as described can be returned at our expense for a full refund, regardless of any as-is marking.
If you are dissatisfied for any reason, contact us first and give us a chance to work things out; if we cannot fix it, you receive 100% of your purchase price back.
We do not keep or share your information anywhere. Your information resides only on eBay and is available to us only for a limited time while we interact with you on an inquiry, order, or return, per eBay usage policies.
Additional information
| Weight | 35.0000 lbs |
|---|---|
| Dimensions | 14 × 14 × 14 in |
| Brand | |
| ROTOR TYPE | Fixed-Angle Rotor |
| SPEED TYPE | Variable Speed |
| MPN | |
| FEATURES | Digital Display,Microcentrifuge,Refrigerated |
| COUNTRY OF ORIGIN | Germany |
| INTENDED USE/DISCIPLINE | |
| Condition | |
| Condition Description |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.